Pages

Wednesday, December 7, 2011

TrixBox - YOU MUST ACCESS THE CDR THROUGH THE ASTERISK MANAGEMENT PORTAL!

After doing a clean install, if you log on to TrixBox server web interface and try to view the call logs and you see:

YOU MUST ACCESS THE CDR THROUGH THE ASTERISK MANAGEMENT PORTAL!

Log on to you server using the command line and run the commands below.

service memcached start
chkconfig --add memcahced
chkconfig memcached on

The memcache module is not set to load during system startup. The above commands turns on the service and sets it to load during system startup.
Posted by at
Labels: , ,

7 comments:

  1. AnonymousJanuary 14, 2013 at 8:11 PM

    Thank you that did it for me..

    ReplyDelete
  2. AnonymousFebruary 28, 2013 at 5:49 AM

    Dear Michael,

    Brilliant! I use TrixBox 2.8.0.4 and after these commands I se all of reports.

    Thank You!


    Best Regards,

    Bela Vajda

    ReplyDelete
  3. UnknownMarch 5, 2013 at 12:46 PM

    Thanks for the simple fix, others were going around and around in circles.

    ReplyDelete
  4. AnonymousMarch 15, 2013 at 9:16 AM

    Thanks!

    ReplyDelete
  5. AnonymousJune 2, 2013 at 4:08 AM

    Thanks alot:)

    ReplyDelete
  6. AnonymousJanuary 2, 2015 at 1:32 AM

    Thank! Working great...

    ReplyDelete
  7. UnknownOctober 7, 2015 at 3:12 AM

    Thanks alot for sharing this...!!!
    trixbox resellers in UK

    ReplyDelete

Subscribe to: Post Comments (Atom)